Talking Silver Keychain Instructions On the front of the keychain you will feel a LCD display screen and a large rubber button underneath. On the back you will feel three smaller rubber buttons. From left to right these buttons are: MODE, HOUR, MINUTE. To hear the time: Press the large rubber button on the front of the keychain. To set the time: Turn the keychain over so the smaller buttons are accessible. Press the MODE button you will hear ‘dit’ and the display will flash, indicating you are in time-set mode. Use the HOUR and MINUTE button to adjust the time accordingly. Once you have set the clock time, press the MODE button twice and you will hear ‘dit dit dit’, this will bring you out of the mode function and back to the time-display. To set the alarm: Press the MODE button twice, you will hear ‘dit dit’ and the display will flash and show AL. Again use the HOUR and MINUTE buttons to set the alarm time accordingly. Once you have set the clock time or alarm time press the MODE button again and you will hear ‘dit dit dit’, this will bring you out of the mode function and back to the time-display. To turn the alarm on/off: In time-display, press the HOUR button. If you hear ’dit, dit, dit’ followed by the set alarm time then the alarm is active, and a bell will be displayed. If you hear ’dit’ then the alarm is off and the bell will disappear from the display. To Enable/Disable the hourly report function: In time-display press the minute button to turn the turn the hourly report on or off. If you hear ‘dit, dit, dit,’ the hourly report is on and a symbol will be displayed. If you hear ‘dit’ the hourly report is off, and the symbol will disappear from the display. Changing the batteries: The batteries are accessed through the back of the unit, by unscrewing the two screws. When this is required we recommend the unit be returned to us. For a charge of £2.50 we will change the battery, check the unit and set the time. Batteries are also available for purchase at a cost of £2.00 per set.